Contact Us
Get Reports
  • 503-641-2222
  • Get A Quote

Something Powerful

Tell The Reader More

The headline and subheader tells us what you're offering, and the form header closes the deal. Over here you can explain why your offer is so great it's worth filling out a form for.

Remember:

  • Bullets are great
  • For spelling out benefits and
  • Turning visitors into leads.

Fire Pump Repair in Seattle, WA, San Jose, CA, and Portland, OR Areas

Fire sprinklers are the first line of defense against the spread of fire in a commercial facility, and they require a steady supply of water at the appropriate pressure to operate properly. A fire pump provides that pressure, and it is vulnerable to problems due to infrequent use, corrosion, and other challenges.

To keep your fire pump working and ready for an emergency, talk to our team at Performance Systems Integration. We offer fire pump repair, as well as inspections, testing, installation, and more. Our experts are available 24/7 for fire pump services, and we work with businesses throughout Seattle, Washington, Portland, Oregon, San Jose, California, and the surrounding areas of the Pacific Northwest.

Has your fire pump been serviced recently? Make sure it is code-compliant and ready for an emergency with fire pump services from PSI. Call 855-723-3774 or contact us online to schedule an appointment today.

Fire Pump Repair in Seattle and Spokane

If your fire pump has failed an inspection or you have noticed problems during routine maintenance, our experts at PSI can help. We offer fire pump repairs in Seattle, Tacoma, and the surrounding areas, and our team is available 24 hours a day for emergency service. Our experts are equipped to perform a variety of both simple and advanced fire pump repairs, including:

  • Fire pump troubleshooting and diagnosis
  • Complete disassembly, inspection, and reassembly
  • Pressure regulator and relief valve repair or replacement
  • Shaft and wear ring repair or replacement
  • Shaft alignment and balancing
  • Impeller repair, replacement, and balancing
  • Motor repair, replacement, and rebuilding
  • Gasket and seal replacements
  • Hardware repair and replacement

Choose PSI for expert fire pump repairs in the Seattle and Spokane areas. Contact us today to schedule an appointment.

Choose Performance Systems Integration
Call Us At855-723-3774 855-723-3774

Fire Pump Inspection & Testing in San Jose, CA

Don’t take it for granted that your fire pump and related systems are working properly. With time, corrosion can damage metals, seals can fail, and lubricants can break down. Stay code-compliant and prepare for an emergency with fire pump inspection and testing from PSI. Our team will inspect the fire pump, valves, and piping for problems, plus we will perform all annual testing, including:

  • Testing circulation and relief valves
  • Testing tamper and flow switches
  • Measuring water pressure and flow rates
  • Aligning couplings
  • Changing motor oil
  • Starting and monitoring the engine

We also recommended that your facility perform weekly pump function tests, as well as more in-depth monthly tests. To schedule a fire pump test and inspection in San Jose, California, contact our team today.

Call Today for Fire Pump Services in Seattle, WA, San Jose, CA, and Portland, OR

Keep your staff and your commercial property safe with fire pump service and repairs from Performance Systems Integration. Our team is dedicated to the safety of your business, and we offer a full range of fire and life safety services in the Seattle and Portland areas.

Call 855-723-3774 or contact us online for fire pump services in the Pacific Northwest or Northern California today.

Fire Pump Repair FAQs

Fire pumps are essential protection for your property. Here are some common questions about our fire pump repair services and how you can keep yours in good, working order.

What does a fire pump do?

A fire pump increases the pressure from the water source to the fire sprinkler system so it will send an appropriate amount of water quickly when a fire occurs. This critical component is necessary to make the fire sprinkler system work as it was designed to work, but it is only necessary for buildings where the fire sprinkler system requirements are higher than the water supply’s capabilities.

How can I avoid fire pump repairs?

Maintaining a fire pump can help building managers avoid costly repairs. In addition to keeping it lubricated, the system should be run on a weekly or monthly basis. This helps ensure it is operating properly. In addition, the drain lines need to be checked regularly to see if they are draining, and the area near the fire pump needs to be kept clear of rust and debris. Many of these tests can be done as part of your regular fire pump inspection service.

Why is the fire pump bearing getting too hot?

The bearing cap on a fire pump should not operate at more than 200 degrees Fahrenheit and ideally should operate around 175. if it is operating higher than this, it may be due to poor lubrication of the system. Bearing failure can also lead to the system overheating. This is a sign that the fire pump needs to be repaired.

CONTACT US FOR FIRE PROTECTION SERVICES FOR YOUR BUSINESS

If you have an inquiry regarding Performance Systems Integration or any of our fire protection services, please make a selection below.

For our full list of inquiry selections, please visit our Contact Us page.

Need Service or Have a Question?
Let’s Talk
What Our Clients Say About Us
Greystar

“We love using PSI! Their team is very responsive and they provide a one stop shop for all our fire testing, supply and repair needs. Their customer service and responsiveness to issues that raise keep...” Read More

Gavin Shearer,
Regional Maintenance Manager, GREYSTAR
residenceInn

“We appreciate PSI’s willingness to work alongside our renovation crew to minimize the interruption to our guests. Everyone I worked with on the project have all been patient, easy to work with and professional.”

Kim Saunderson,
General Manager, Residence Inn
att

“PSI has become one of my most valued resources. The knowledge base and technical/troubleshooting ability has made them indispensable. They are super nice and always dependable and eager to help not matter what the ask.”

Neal McNeal,
Chief Engineer, ATT
kaiser permanente

“PSI has always ensured our code compliance. Their staff is extremely knowledgeable and has continually stayed on top of code requirements. PSI technicians are very professional and always responsive to our needs.”

Daniel Jones,
Facility Manager, Kaiser Permanente
thrive

“We couldn’t be happier with PSI! They provide outstanding customer service in all areas, are very quick to respond, with competitive proposals and great service. They have even provided some on-site training opportunities for some...” Read More

Tory Costello,
Regional Manager, Thrive Communities
delta

“I wanted to express my appreciation for the service PSI has provided us over the years. The staff has been a pivotal part in making sure we get these buildings tested correctly and efficiently. We...” Read More

Michael Eddington,
Project Manager, Delta Building Services Seattle
Affiliates & Certifications