Fire Alarm Acceptance Testing

Posted on: October 23, 2012

Fire Alarm Testing for Central Oregon AHJ’s

The System installer and a qualified representative will perform this acceptance test and log the test results on “NFPA Inspection and Testing Form” or other document required by the authority having jurisdiction (AHJ).
The sytem installer is responsible for ensuring that the testing does not damage equipment.
All failures or discrepancies revealed during the testing, as well as any deviation from NFPA 72, must be entered as a note on NFPA Test Form.
Confirm that an input/output: matrix for the system is available.

Need Service or Have a Question?

Let’s Talk

Get in touch with our experienced team today.

Testimonials

“June 7, 2019 Hello Tracy, I wanted to reach out and thank you for your team’s hard work during the installation of our new fire panel, guest room horns and strobes. We appreciate your team’s willingness to work alongside our renovation crew to minimize the interruption to our...”

- Kim Saunderson, General Manager Residence Inn, Redmond, WA

“I’ve been working with the Performance Systems Integration team for more than a decade and they have became individually and collectively one of my most valued resources I have. The knowledge base and technical/troubleshooting ability has made them indispensable for all TIs, maintenance and life cycle replacement forecasting. ...”

- Neal McNeal, Chief Engineer ATT, Redmond Town Center Campus/ Willows Technical Center Campus

Affiliates & Certifications

Website Design by

Blue Corona