office (503) 641-2222
fax (503) 641-1464

Safe Fire Detection Products

What is Air Sampling Fire Detection?

Air Sampling, also know as aspirating, fire detection utilizes an aspirator, and a supervised sample pipe network to return air samples from an environment that is being protected, back to a detection unit for analysis.  The air sample is drawn into the pipe network through either holes drilled in the pipe, a capillary or extended drop from the pipe, or sample heads which can be either adjustable or non-adjustable.  Each of these methods use flow calculations to determine sample hole sizes, pressure drops and acceptable pipe lengths to be sure the system meets NFPA guidelines.  Below are details for each of these methods

Watch the Video
Go to fullsize image  Hybrid Air Sampling Detectors

Why ProSeries?

The new advanced CCD (Cloud Chamber Detection) technology from Protec combines the benefits of spot, laser, and cloud chamber detection into a single detector. Unlike laser and conventional systems, ProSeries detectors using CCD technology only detect combustion. CCD technology is immune to false alarms from dirt, dust, temperature and humidity which plague other early warning air sampling and spot detectors.
• Before Smoke

• No False Alarms

• Detects in All Four Stages of Fire

*Obscuration (obs/ft) - Percentage of light decrease per foot
 due to smoke, dirt, dust or pollutants in an environment. CCD
 technology only senses combustion and can detect from zero
 to 100% obs/ft. while remaining immune to false alarms.


What is Linear Heat Detection?

 

 

Linear Heat Detection (LHD) is a line-type form of fixed temperature heat detection used in common commercial and industrial environments. This linear cable can detect a fire anywhere along its entire length and is available in multiple temperatures.

Why ThermoCable?

• Addressable or Conventional

• Up to 10,000 ft./zone

• Use with Any New or Existing Panel

• Lower Cost

• Upgrade Existing Systems

Go to fullsize image  ThermoCable

What is Portable Aspirating Fire Detection?

Portable  Aspirating Fire Detection is used to locate the source of an early warning alarm.  Any aspirating or spot detection system can tell you which room, now the ProLocator can help you find where in the room!

With Early Warning Air Sampling Systems protecting up to 20,000 sqft. per zone, identifying the source of an impending fire threat was very difficult. The ProLocator is the industry’s first handheld portable aspirating fire detector which can lead you to the source that is causing an early warning alarm, which otherwise cannot be seen. The ProLocator can be used virtually anywhere; computer rooms, factories, schools, malls, telecom centers, etc., and can be operated by almost anyone.

 

 

Watch the Video

Go to fullsize image Portable Fire Detector

What is Cryogenic Gas Leak Detection?

The ThermoCable LNG Cryogenic Gas Leak Detection System is specifically designed to offer the only high sensitivity and cost effective solution for protecting any compressed gas storage tanks, equipment, and pipelines from a potentially catastrophic fire or explosion. The system consists of a nylon coated ultra-sensitive detection cable and interface module. The ThermoCable LNG Interface Module and detection cable can be easily connected to, and powered by, any fire alarm control panel or building management system.


Why ThermoCable LNG?

• Lower Cost

• Flexible for Easy Installation

• Self Restoring

• Universal Interface Works with Any Panel or DCS

• Nylon Coated for UV Protection

• Intrinsically Safe Circuitry

• 4-20mA and 0-10VDC Analog Outputs

 

 

 

 

Go to fullsize image ThermoCable LNG